|
|
|
Junior Member
 
Group: Forum Members
Last Login: Thursday, February 04, 2010 10:24 AM
Posts: 15,
Visits: 31
|
|
| if i wanted to control a robot arm and 2 dc motors all at 12 volts, would i need to program or get another microcontroller to work with the serializer and what wiring would i have to buy? thanks in advance
|
|
|
|
|
Forum Guru
Group: Forum Members
Last Login: Monday, December 27, 2010 5:21 PM
Posts: 55,
Visits: 139
|
|
if i wanted to control a robot arm and 2 dc motors all at 12 volts, would i need to program or get another microcontroller to work with the serializer and what wiring would i have to buy?
thanks in advance
I hope I can help you out here. I have not actually done what you are saying but have been planning to do the same. From what I gather you will need to purchase something like this http://www.roboticsconnection.com/p-77-10-amp-dual-h-bridge.aspx for your DC motors. In regards to the robot arm - if they are just using servos you should be able to control them from the Serializer board itself.
Hope this helps!
-Danny
Animusoft
RUG Community
|
|
|
|
|
Junior Member
Group: Forum Members
Last Login: Thursday, February 04, 2010 10:24 AM
Posts: 15,
Visits: 31
|
|
| thanks for the help. its a god thing im not paying for my robot because these parts are really expensive.
|
|
|
|